RG-EasyGate Series Hardware Installation Guide V1.28
Figure 1-6 Backpanel of Ruijie EG1000C Breakout Gateway
Basic Configuration of Ruijie EG1000C Breakout Gateway
Table 1-5 Basic Configuration of Ruijie EG1000C Breakout Gateway
Item
Description
DDR2 SDRAM: 1 GB
BOOTROM: 8 MB
FLASH: 128 MB
Storage
SATA Hard Disk: 320 GB
WAN port: two default 10/100/1000 M self-adaptive fast Ethernet copper
ports (0/5, 0/6), automatic recognition of network cable and cross-over
cable. Each WAN port is fiber/copper combo port and supports
1000BASE-SX/LX/ZX mini GBIC optical module.
LAN port: five default 10/100/1000 M self-adaptive fast Ethernet copper
ports (0/0, 0/1, 0/2, 0/3, 0/4), automatic recognition of network cables
and cross-over cables.
All Ethernet ports can be switched between WAN mode and LAN mode.
Management port: one management port (in bridge mode)
I/O Setup
One console port, one USB port and one SD card.
BYPASS
Hardware BYPASS: 0/3-0/5, 0/4-0/6;
Supports the two modes of power-off, power-on BYPASS and the main
program configured BYPASS
Interface Standard
Ethernet: 10Base-T/100Base-TX/1000Base-TX, 1000BASE-SX/LX/ZX
Configuration port (console port): RS-232
Dimension (W x H x D)
440 x 43.6 x 200 mm (excluding the foot pad)
Voltage
100–240 V; 50–60 Hz
Power Consumption
Less than 30 W
Temperature: 0°C to 45°C
Working Environment
Humidity: 10% to 90% RH (non-condensing)
Since there are numerous types of U-disk and SD cards, we cannot ensure that the system supports all of
them.
The Kingston 2G SD card and the 2G U-disk with FAT 32 are recommended to be used.
