RG-EasyGate Series Hardware Installation Guide V1.28
Basic Configuration of Ruijie EG1000S Breakout Gateway
Table 1-7 Basic Configurations of Ruijie EG1000S Breakout Gateway
Item
Description
DDR2 SDRAM: 2 GB
BOOTROM: 2 MB
FLASH: 512 MB
Storage
SATA Hard Disk: 320 GB
Supports gateway mode (default) and bridge mode.
WAN port: four default 10/100/1000 M self-adaptive fast Ethernet ports,
automatic recognition of network cables and cross-over cables. The 0/1
port can also be used as an optical port, which supports the
1000BASE-SX/LX/ZX mini GBIC optical module.
LAN port: two default 10/100/1000 M self-adaptive fast Ethernet ports,
automatic recognition of network cable and cross-over cable.
All Ethernet ports can be switched between WAN mode and LAN mode.
Management port: one management port (in bridge mode)
I/O Setup
One console port
BYPASS
Hardware BYPASS: 0/0-0/1, 0/3-0/4
Supports the two modes of power-off, power-on BYPASS and the main
program configured BYPASS.
Ethernet: 10Base-T/100Base-TX/1000Base-TX,
1000BASE-SX/LX/ZX
Interface standard
Configuration port (console port): RS-232
Dimension (W x H x D)
440 x 43.6 x 400 mm (excluding the foot pad)
Voltage
100–240 V; 50–60 Hz
Power Consumption
Less than 50 W
Temperature: 0°C to 50°C
Working Environment
Humidity: 10% to 90% RH (non-condensing)
Since there are numerous types of U-disk and SD cards, we cannot ensure that the system supports all of
them. The Kingston 2G SD card and the 2G U-disk with FAT32 are recommended to be used.
For the RG-EG1000S product has the built-in hard disk, please avoid the vibration and collision in the
process of moving and usage.
