RG-EasyGate Series Hardware Installation Guide V1.28
Whether the LED indicators on the front panel of the breakout gateway works normally.
Checking procedure: Refer to the section of indicators description about each product in the first chapter “Product
Overview”.
Whether the configuration terminal displays normally
Checking procedure: After the breakout gateway is powered on, the terminal will display the software self-extracting
information of the breakout gateway.
Starting Process
The following information will be displayed when the breakout gateway is started for the first time:
***********************************************
System bootstrap ...
Boot Version: RGOS 10.3(4), Release(53498)
Nor Flash ID: 0x00010049, SIZE: 2097152Bytes
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
Press Ctrl+C to enter Boot Menu ......
Main Program File Name rgos.bin, Load Main Program ...
Executing program, launch at: 0x00010000
Ruijie General Operating System Software
Release Software (tm), RGOS 10.3(4), Release(53498), Compiled Fri Apr 3 08:45:59 CST 2009
by ngcf31
Copyright (c) 1998-2009 by Ruijie Networks.
All Rights Reserved.
Decompiling or Reverse Engineering is Not Allowed.
00:00:00:00: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
00:00:00:00: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
00:00:00:17: %LINK-5-CHANGED: Interface FastEthernet 0/1, changed state to up
00:00:00:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet 0/1, changed state
to up
00:00:00:17: %LINK-5-CHANGED: Interface FastEthernet 0/0, changed state to up
00:00:00:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet 0/0, changed state
to up
00:00:00:31: %SYS-5-COLDSTART: System coldstart.
Ruijie>
After the startup, you can configure the breakout gateway.
