User
’
s Manual of RDC6442G(U)-DFM-RD Control System
SHENZHEN RUIDA TECHNOLOGY
42
This item is only used to preview the file on the screen, and it is no
meaning to the machine’s movement.
8.4 File Key
8.4.1 Memory File
On the main interface, if “File” key is pressed, it will show as below:
When showing this menu, the system would read the memory file firstly, the file name and the
work times would be listed in the area, and the selected file is previewed in the bottom right area.
“Y+/-” keys could be used to move the cursor on the file name list. When the cursor is on a target
file name, presses the “Enter” key, the selected file will be previewed on the main interface, and
then if “Esc” key is pushed, the preview will disappear.
“X+/-” keys could be used to move the cursor left and right. All the item show as below:
Read mem file
: read the memory file list;
Udisk
: read the U disk file list;
Other
: the other operation of the memory files;
Run
: To run the selected file;
Track
: To track the selected file, and the track mode is optional;
Work time
: To forecast the running time of the selected file, and the time is
accurate to 1ms;
Clear count
: To clear the running times of the selected file;
Delete
: To delete the selected file in the memory;
Caution
Figure 8.4-1
