Frozen Meat Cutter GR 50
9
Check the correct rotational direction of the machine by
starting it. The machine does not start in case of wrong
rotational field!
•
In such a case, an electrician must change the
direction of rotation inside the mains plug.
•
The power supply to the machine must be fuse-
protected with 16A secured with an AC/DC sensitive
ground-fault circuit interrupter (type B).
3
Operating instructions
Please refer to the short instructions supplied with your machine for
the operation of your frozen meat cutter.
Follow also the safety instructions in Chapter 1.1!
In its respective life cycle phases (transport,
commissioning, setup, operation, cleaning,
decommissioning, care / maintenance, dismantling /
disposal) this machine is designed for 1-person operation!
When using this machine, no other person may be present
near the machine. The exception (2-man operation):
•
Installation and removal of the cutting blades
•
Transport of machine and machine parts
•
Maintenance activities
Do not reach into the area underneath the trough when
feeding has started!
The operator must make sure that no persons, who do not
know the hazards of the machine or cannot anticipate
them, are about in the area of the machine!
The operator controls may only be operated by touching it
with the fingers. Using any objects (e.g. blade) is
prohibited!
