Cutting machine AR 10
7
When a machine is unattended, the knife protection box
must be closed before leaving the workplace!
When processing very watery products, spraying form the
chamber may occur in spite of installed slider! With such
product it is recommended to stand to the side of the cham-
ber when the machine starts.
!!! Maintenance
Touching electrical components may cause serious inju-
ries or death.
Work on electrical equipment of the machine may only be
carried out by qualified technicians! Always disconnect
machine from the mains during this process!
The protective covers (lids on rear, etc.) may be removed
only while performing maintenance!
Beware of hot surfaces, e.g. drives, hydraulic unit, etc.
during maintenance work!
Danger from pressurised and/or escaping hydraulic oil!
Work on the hydraulic system of the machine may only be
carried out by qualified technicians!
Always disconnect machine from the mains during this
process!
Depressurise the complete hydraulic system! !
Excessive contact with the hydraulic oil may cause skin ir-
ritation and eye injuries!
1.3
Intended use
The cutting machine may only be used to cut foodstuff that is not fro-
zen (-5 °C to +80 °C) into cubes, strips and slices or grated in different
sizes. The room temperature must not exceed 12 °C for reasons of
food hygiene!
