Cutting machine AR 10
11
3
Operating instructions
Please refer to the short instructions supplied with your machine for
the operation of your cutting machine.
Also follow the safety instructions in chapter 1.1!
In its respective life cycle phases (transport, commission-
ing, setup, operation, cleaning, decommissioning,
care/maintenance, dismantling/disposal), this machine is
designed for single person operation!
When using this machine, no other person may be present
near the machine. The exception (2-man operation):
•
Transport of machine and machine parts
•
Commissioning
•
Maintenance activities
The following is strictly prohibited and failure to comply
represents gross negligence:
•
Operating the machine without lids on the rear!
•
Manipulating or deactivating the safety devices on
the machine!
Working on the machine without lids installed on the rear
is permitted only for a Rühle service technician during the
maintenance phase!
The supervisor must be notified if hydraulic oil escaped
from the hydraulic cylinder is noticed in the chamber!
The operator must make sure that no persons, who do not
know the hazards of the machine or cannot anticipate
them, are about in the area of the machine!
