Cutting machine AR 10
14
*)
13308, FINK
–
Antisept G
Because of customer-specific application prohibitions, QAC-containing
products are sometimes not used since the IFS standard must be met.
Possible alternative products would be, for example, FT 107 DES.
Supplier:
FINK TEC GmbH, Oberster Kamp 23, 59069 Hamm, Germany
Tel. +49 2385-730 / [email protected] / www.finktec.com
4.3
Cleaning procedure
Please refer to the short instructions supplied with your machine for
carrying out the cleaning procedure.
Cleaning preparations:
•
To ensure optimum cleaning, some components of the machine
must be removed.
•
Remove any objects lying on the machine.
•
Remove the slider (chamber closure).
•
Remove the plunger.
•
Open the knife protection box.
•
Unscrew the handle nut.
•
Remove the cut-off knife and the grid frame with the knife lev-
els.
•
Remove the product stripper bar from the ejection hood.
Remove and clean the hygiene bottom only after cleaning
of the machine with a high-pressure cleaner has been
completed!
5
Service: care, maintenance, repair
Any work related to any kind of service may be carried out only by
Rühle service technicians and by persons authorised by Rühle in writ-
ing. In this regard, a distinction is made between regular care and
maintenance and repair. The respective qualification certificate must
be issued explicitly for the corresponding task.
