background image

Tumbler MKR 600

 

 

Table of Contents 

Safety Instructions ............................................................................. 3 

1.1 

Safety instructions ................................................................... 3 

1.2 

Remaining risk of accidents .................................................. 6 

1.3 

Intended Use ............................................................................... 7 

Installation instructions ................................................................... 7 

2.1 

Machine transport and setup ............................................... 7 

2.2 

Workplace description ............................................................. 8 

2.3 

Connecting the machine ......................................................... 9 

Operating instructions ...................................................................... 9 

Cleaning instructions .......................................................................12 

4.1 

Safety instructions .................................................................12 

4.2 

Cleaning agents and disinfectants....................................13 

4.3 

Cleaning procedure .................................................................13 

Service: Care, maintenance, repair .............................................14 

5.1 

Regular care ..............................................................................14 

5.2 

Regular maintenance .............................................................15 

5.3 

Repair and spare parts ..........................................................16 

Disposal ................................................................................................16 

Technical documentation ..............................................................16 

7.1 

Technical data ..........................................................................16 

7.2 

Electrical circuit diagram ......................................................17 

EC Declaration of Conformity according to Directive 
2006/42/EC ........................................................................................18 

 

 
 
 
 

Status: 28/08/2015 
Changes reserved

 

 

 

Summary of Contents for MKR 600



















Reviews: