WallRider
Order and Installation Manual:
Installation
WallRider
–
Section 3 - Installation
© Rugged Interactive
2019
03
04
3.
Run the cables to the positions
they are required for the targets.
Please note, cable 1, 2 and 3
operate the quick start game
functions, therefore these
targets should be positioned in a
suitable location.
8.
If possible, stress relief all cables
every 50cm.
7.
Once all targets are connected
correctly, ensure they are fully
secured (NB: Do not overtighten
grip screws.)
6.
Check that the Quick Start
games are illuminated and that
they start the correct program.
This will ensure that the targets
are connected correctly.
5.
Turn on the product.
4.
Connect the loose ends of the
CAT5 cables into their
corresponding targets. Mount
the targets.
