TriggerTrac
Order and Installation Manual:
Installation
TriggerTrac
–
Section 3 - Installation
© Rugged Interactive
20
21
TriggerTrac Display / Score Box (HUB) Installation
Notes:
▪
Fix HUB using any suitable self-tapping or wood screws into the surface material. The HUB can be
recessed to be flush with the surface or affixed on top of the foam-backed vinyl if necessary.
▪
Note:
Cables exit is at the rear of the display box.
01
02
1.
Mark out and cut the recesses for the HUB
(score box) A 502mm x 482mm hole (+3/ -0)
will need to be cut to accommodate this.
2.
Mount score box, this contains two
hanging cables for the start and stop
buttons, Connect the CAT5 cables
into their corresponding positions
on the HUB.
