SkyClimb
Order and Installation Manual:
Installation
SkyClimb –
Section 3 - Installation
©
Rugged Interactive
2021
SkyClimb Installation
Pods:
Pods should be mounted onto a wall using the three 6 mm mounting points on each pod using the supplied
wood screws.
Figure 3.4.1
shows a typical Pod installation.
Figure 3.4.1:
Typical SkyClimb Installation
NOTE:
Please use good practice when running data cables to and from products, external pods and
sensors. Support long cables at least every 50 cm and provide adequate strain relief for connection points.
Cut out for Pod
Pod
Plywood Base Layer (if applicable)
Top Structure
Cable passes
through cut hole.
CAT5 cable
(Be careful not pinch
or trap cable.)
Screw
