Getting to Know the Hardware Features
Ethernet Connector, Aiming Button and Reset Button
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
18
To reboot the ZoneFlex P300, press the Reset button (
). To reset the
ZoneFlex P300 to factory defaults, press and hold the Reset button for six or more
seconds; the ZoneFlex P300 resets its configuration to the factory default and
reboots.
CAUTION!
Resetting the ZoneFlex P300 to its factory defaults causes the ZoneFlex
P300 to lose all configuration settings, including the provisioning, or pairing, of the
root bridge and non-root bridge pairs. If you do need to reset a ZoneFlex P300 to
factory defaults, you will need to re-provision the ZoneFlex P300. In factory default
state, the role of all ZoneFlex P300 units is root bridge. Therefore, running the factory
default procedure on any ZoneFlex P300 results in that unit be coming unreachable
on the non-root bridge default IP address (192.168.2.254).
Figure 7. ZoneFlex P300 Reset button
