Ruckus Wireless ZoneFlex P300, User Manual

Page: 12 / 85

Unpacking the ZoneFlex P300
Package Contents
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
12
NOTE For more information on the Ruckus Wireless system, including FlexMaster
and other Ruckus Wireless technologies, visit
www.ruckuswireless.com
Unpacking the ZoneFlex P300
1 Open the ZoneFlex P300 package, and then carefully remove the contents.
2 Return all packing materials to the shipping box, and put the box away in a dry
location.
3 Verify that all items listed in Package Contents are included in the package.
4 Check each item for damage. If any item is damaged or missing, notify your
authorized Ruckus Wireless sales representative.
Package Contents
NOTE Appendix A: Customer-Orderable Parts includes pictures and descriptions
of other factory-orderable and customer-supplied parts.
Before configuring or deploying your ZoneFlex P300, verify that all items listed below
are included in the package. If any item is damaged or missing, notify your authorized
Ruckus Wireless sales representative.
• One or two ZoneFlex P300 kits, depending on ordered part:
• 901-P300-xx01, ZoneFlex P300, 802.11ac 5GHz point-to-point wireless
bridge, includes one ZoneFlex P300 kit
• 901-P300-xx02, ZoneFlex P300, 802.11ac 5GHz point-to-point wireless
bridge, pre-provisioned pair, includes two ZoneFlex P300 kits
• where ‘xx’ is a country-specific code.
• Each ZoneFlex P300 kit contains:
• One ZoneFlex P300, which includes a 12mm stainless steel M6x1 Phillips
earth ground screw with split lock and flat washers (A in
Figure 2 )
• One M25 data cable gland (B in Figure 2 )
• One green/yellow earth ground wire with ring terminal (C in Figure 2 )
• One wall- or pole-mounting bracket (D in Figure 2 )
• One U-joint bracket (E in Figure 2 )