Ruckus Wireless ZoneFlex P300, User Manual

Page: 13 / 85

Unpacking the ZoneFlex P300
Package Contents
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
13
• One linkage bracket with two serrated external-tooth lock washers (F in
Figure 2 )
• One ZoneFlex P300 bracket (G in Figure 2 )
• Two sets 50mm stainless steel M8x1.25 hex bolt with split lock and flat
washers (H in
Figure 2 )
• Four SAE32-sized stainless steel clamps, 38.1mm to 63.5mm (1.5" to 2.5")
inner diameter (I in
Figure 2 )
• Four sets stainless steel 8mm M4x0.7 pan head Phillips screws with split lock
and flat washers (J in
Figure 2 )
• Eight sets stainless steel 0.5-inch x 0.250-28 hex bolts with split lock and flat
washers (K in
Figure 2 )
• Service Level Agreement/Limited Warranty Statement
• Regulatory Statement
• Declaration of Conformity, if required
• ZoneFlex P300 Wireless Bridge Quick Setup Guide
• ZoneFlex P300 Wireless Bridge Mounting Guide
• N-Type Connector Sealing Instructions
NOTE This kit includes extra mounting hardware. You may use the extras wherever
required.
Figure 2. ZoneFlex P300 field-installation kit contents
F G H E A C B D I J K