manualshive.com logo in svg

Ruckus Wireless ZoneFlex 7363, User Manual, Page: 99 / 128

Share
Download
Ruckus Wireless ZoneFlex 7363 User Manual Download Page 99

91

Configuring the Access Point

Configuring Hotspot Service

NAS ID

Specify the Network Access Server identifier of this 
device. The NAS-ID attribute is sent in RADIUS 
access and accounting request messages. It can 
also be used as location identification when NAS-
IP-Address cannot be used for this purpose.

WISPr Location ID

Specify the Hotspot location identifier. This value 
is provided in the RADIUS access and accounting 
requests. It is recommended that the value is in the 
form of "

isocc=<ISO_Country_Code>, 

cc=<E.164_Country_Code>,ac=<E.164_Ar

ea_Code>,network=<SSID/ZONE>

".

WISPr Location Name

Specify the hotspot location and operator's name. 
This value is provided in the RADIUS access and 
accounting requests. It is recommended that the 
value is in the form of 
"

<HOTSPOT_OPERATOR_NAME>,<Location

".

Location Description

Specify the description of location. This value is 
provided in the HTTP redirection.

Accounting Update Interval

Specify the interval for RADIUS accouting requests.

Interim Redirect Interval

Specify the interval after which users will be 
redirected to the login URL.

Maximum Session Time

Enter the maximum session time in minutes.

Grace Period

Specify the maximum time that a user may 
disconnect from the Hotspot service and return 
without the need to login again.

UAM Port with HTTP

TCP port to bind to for authenticating clients using 
HTTP.

UAM Port with HTTPS

TCP port to bind to for authenticating clients using 
HTTPS.

RADIUS Disconnect Port

UDP port to listen to for accepting RADIUS 
disconnect requests.

Swap Input and Output 
Counters

Swap the value of input counters (packets, octets 
and giga words) and output counters in RADIUS 
accounting requests. This option is mainly for 
backward compatibility with existing Chillispot 
deployments. 

Encode User Password

Encode user password with challenge string, if 
UAM secret is not specified; otherwise, encode 
user password with both challenge string and UAM 
secret.

Summary of Contents for ZoneFlex 7363

































































































































Reviews:

No comments