manualshive.com logo in svg

Ruckus Wireless ZoneFlex 7363, User Manual, Page: 11 / 128

Share
Download
Ruckus Wireless ZoneFlex 7363 User Manual Download Page 11

3

Introducing the ZoneFlex Access Point

Getting to Know the Access Point Features

ZoneFlex 2942/7942 Access Point

The side panel of ZoneFlex 2942/7942 features four LED indicators that can be used 
to assess both device and network status. The rear view displays the connector panel, 
which includes the LAN ports and the optional external antenna connection. Refer to 
the following illustrations and tables to learn more. 

Side Panel Features

The ZoneFlex 2942/7942 chassis includes a Kensington lock (on the side of the unit 
opposite the OPT and DIR LEDs) and a lockable “sliding door” (shown in 

Figure 1

) 

that hides and protects the rear connector I/O panel and status LEDs. As your AP may 
be placed in a public location, the lock and door mechanisms can help prevent 
tampering or theft.

Figure 1.

ZoneFlex 2942/7942 side panel features

Table 3

 lists the various LED states on ZoneFlex 2942/7942 and describes what each 

LED state means. It also describes how to use the HARD RESET button and other 
elements on the side panel.

Table 3.

ZoneFlex 2942/7942 side panel elements

Number LED/Button Name Description

1

OPT LED

Not used in this model

6

5

1

2

3

4

7

8

Summary of Contents for ZoneFlex 7363

































































































































Reviews:

No comments