manualshive.com logo in svg

Ruckus Wireless ZoneFlex 7363, User Manual, Page: 116 / 128

Share
Download
Ruckus Wireless ZoneFlex 7363 User Manual Download Page 116

108

Managing the Access Point

Working with Event Logs and Syslog Servers

Working with Event Logs and Syslog Servers

Both the 

Maintenance > Support Info

 and 

Administration > Log

 pages can be used 

to view the AP’s current log file text. You can use the former to send the log to Ruckus 
Wireless support directly or save it to a local file, and use the latter to configure 
automatic delivery of log files to a syslog server. 

Enabling Logging and Sending Event Logs to a 
Syslog Server

If you have a syslog server on the network, you can configure the Access Point to send 
the device logs to the server. You will need to enable logging (if disabled) and 
configure the Access Point to send logs to the syslog server.

1.

Go to 

Administration

 > 

Log

. The Administration > Log page appears.

2.

Look for 

Log Status,

 and then click 

Enabled

.

3.

After enabling logging, configure the following options:

•

Syslog Server Address

: To enable the AP to send messages to a syslog server 

as they appear, enter the IP address of the syslog server.

•

Syslog Server Port

: By default, the syslog port number is 514. If the syslog 

server is using a different port, enter that port number in this field.

4.

Click 

Update Settings

 to save and apply your changes.

Figure 56.

The Administration > Log page

Summary of Contents for ZoneFlex 7363

































































































































Reviews:

No comments