Ruckus Wireless ZoneFlex 7363, User Manual, Page: 45 / 128

37
Installing the Access Point
Step 1: Preconfigure the Access Point
5. Click Use the following IP address , and then configure the IP address settings
with the values listed in Table 18 . For a sample configuration, refer to Figure 21 .
You can leave the Default Gateway and DNS server fields blank.
6. Click OK to save your changes and close the TCP/IP Properties dialog box.
7. Click OK again to close the Local Area Connection Properties dialog box.
Windows saves the IP address settings that you have configured.
Figure 21. Sample configuration in the Internet Protocol (TCP/IP) Properties
dialog box
2. Connect the Access Point to the Administrative
Computer
1. Connect one end of an Ethernet cable to an Ethernet port on the Access Point,
and then connect the other end to the administrative computer’s Ethernet port.
2. Provide power to the AP using either an AC adapter or a PoE injector or switch,
as described in
“1. Connect the Access Point to a Power Source” above.
Table 18. Configure your computer’s IP address settings
IP address
192.168.0.22
(or any address in the 192.168.0.x
network—with the exception of
192.168.0.1
, which
is the default IP address assigned to the Access Point)
Subnet mask
255.255.255.0