manualshive.com logo in svg

Ruckus Wireless SmartZone 3.6, Command Reference Manual

Share
Download
Ruckus Wireless SmartZone 3.6 Command Reference Manual Download Page 7

Preface

•

Document Conventions.............................................................................................................................................7

•

Command Syntax Conventions................................................................................................................................. 7

•

Document feedback..................................................................................................................................................8

•

Ruckus resources......................................................................................................................................................8

•

Online Training Resources......................................................................................................................................... 8

•

Contacting Ruckus Customer Services and Support................................................................................................. 9

Document Conventions

The following tables list the text and notice conventions that are used throughout this guide.

TABLE 1 Text conventions

Convention

Description

Example

monospace

Identifies command syntax
examples.

device(config)# interface ethernet 1/1/6

bold

User interface (UI) components such
as screen or page names, keyboard
keys, software buttons, and field
names

On the Start menu, click All Programs.

italics

Publication titles

Refer to the 

Ruckus Small Cell Release Notes for more information

Notes, Cautions, and Warnings

Notes, cautions, and warning statements may be used in this document. They are listed in the order of increasing severity of potential
hazards.

NOTE
A NOTE provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information.

CAUTION
A CAUTION statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware, firmware,
software, or data.

DANGER

A DANGER statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety labels
are also attached directly to products to warn of these conditions or situations.

Command Syntax Conventions

Bold and italic text identify command syntax components. Delimiters and operators define groupings of parameters and their logical
relationships.

Convention

Description

bold text

Identifies command names, keywords, and command options.

SmartZone Data Plane (vSZ-D) Command Line Reference Guide for SmartZone 3.6

Part Number: 800-71557-001 Rev A

7

Summary of Contents for SmartZone 3.6







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands