Command
Description
Command and Example
show
Shows the DHCP or DHCP pool
configuration .
ruckus(config-dhcp)# show summary
ruckus(config-dhcp)# show get dhcp conf
configuration
ruckus(config-dhcp)# show get datacore
information
Example:
ruckus(config-dhcp)# show summary
vlan-range
This define the VLAN ID for identifying the
pool. Multiple instance of this parameter can
be specified in one pool.
The vlan-ranges must be unique across pools
and there cannot be any overlap across
DHCP pools.
NOTE
This command is seen on
specifying the pool name.
ruckus(config-dhcp)# vlan-range <dd> [dd]
ruckus(config-dhcp-pool)# vlan-range 100
200
Related Commands for DHCP Opt43
Command
Description
Command and Example
end
Saves changes, and informs the data core to
read the configuration file.
ruckus(config-dhcp-opt43)# end
exit
Exits without informing the data core.
ruckus(config-dhcp-opt43)# exit
help
Displays the help message
ruckus(config-dhcp-opt43)# help
history
Shows a list of previously run commands
ruckus(config-dhcp-opt43)# history
logout
Exits from the EXEC
ruckus(config-dhcp-opt43)# logout
no
Disable the option setting configuration.
ruckus(config-dhcp-opt43)# no option
[ <space_name.xx> | space <name> ]
Example:
ruckus(config-dhcp-opt43)# no option
VendorInfo.IP code 8 = ip-address
option
Sets the vendor specific DHCP options.
ruckus(config-dhcp-opt43)# option
[ <space_name.xx> code <num> = <type> |
space <name> ]
Example:
ruckus(config-dhcp-opt43)# option
VendorInfo.IP code 8 = ip-address
show
Shows the DHCP configuration .
ruckus(config-dhcp-opt43)# show
dhcpd.conf file
Configuration Commands
ruckus(config)# dhcp
SmartZone Data Plane (vSZ-D) Command Line Reference Guide for SmartZone 3.6
Part Number: 800-71557-001 Rev A
41
