•
You are now logged into the vSZ-D CLI as a user with limited privileges by looking at the CLI prompt. If you are in limited mode,
the prompt appears as ruckus> (with a greater than sign). To view a list of commands that are available at the root level or user
mode, enter help or ?. See
NOTE
To change the CLI prompt to a privileged mode, see step 5.
FIGURE 3 Using Show Commands
•
As a user with limited privileges, you can view a history of commands that were previously executed and ping a device as seen in
FIGURE 4 Using the Ping command
•
If you want to run more commands, you need to switch to privileged mode by entering enable and the password at the root
prompt as seen in
. The prompt changes from ruckus> to ruckus# (with a pound sign). Refer to the
on page 19
command for details.
Introduction to the Command Line Interface
Accessing the Command Line Interface
SmartZone Data Plane (vSZ-D) Command Line Reference Guide for SmartZone 3.6
16
Part Number: 800-71557-001 Rev A
