2
| DHA...EC CP 20 / ...EC O CP S
EN
Installation, operating and maintenance instructions
2. IMPORTANT INFORMATION
1. FOREWORD
Dear customers,
Thank you for choosing our device.
Before operating the unit, please read carefully these installation, operating and maintenance instructions. If you have
any questions, please contact: (Contact details see page 1)
The data provided in these installation, operating and maintenance instructions are for the product description only. A
statement about a certain condition or a suitability for a certain application cannot be derived from our information.
The information does not release the user from his own assessments and examinations.
All rights reserved by the manufacturer, even in the event of industrial property rights.
Any disposal such as copying and distribution rights lies with us.
This manual contains important information on the safe and appropriate assembly, transport, commissioning, operation,
maintenance, disassembly and simple troubleshooting of the product.
The product has been manufactured according to the accepted rules of current technology.
There is, however, still a danger of personal injury or damage to equipment if the following general safety instructions and
the warnings before the steps contained in these instructions are not complied with.
■
Read these instructions completely and thoroughly before working with the product.
■
Keep these instructions in a location where they are accessible to all users at all times.
■
Always include the operating instructions when you pass the product on to third parties.
2.1. Applicable Documents
The following documents and information on the exhaust fan must be observed in addition to the installation, ope-
rating and maintenance instructions:
Other applicable standards:
■
DIN VDE 0100-100
■
DIN EN 60204-1
■
DIN EN ISO 13857
■
DIN EN ISO 12100
■
VDMA 24186-1
Available documents at www.ruck.eu
■
Installation, operating and maintenance instructions
■
Programming instruction FU (three-phase version)
■
EC Declarations of conformity
■
EC-Declaration of Incorporation (Directive 2006/42/
EC)
■
Commissioning report
■
Call to Tender
■
Dimensioned drawing
■
Technical drawing DWG
■
Technical drawing DXF
■
3D STEP
Nameplate
