iMportant
• the ceramic burner is to be used for decorative purposes only and not as a primary source of
heating.
• Bio ethanol is a hazardous material of dangle level UN 1987, level 3
• the use of the ceramic burner as a multi-burner or open fi re for liquid or solid combustible
materials is not permitted.
• the ceramic burner is to be extinguished using the latch on the topside.
• When the ceramic burner is overfi lled there is a risk of spilling the liquid fuel e.g. when it is
bumped into. this can cause uncontrollable fl ames.
• the fl ames cannot be adjusted by using the latch. this should always be completely opened
when in use.
• Do not smoke while (re)fi lling or lighting the burner. Risk of explosion!
• Never change the construction of the ceramic burner.
• Warning! Never re-fi ll a hot or warm ceramic burner. Risk of explosion!
• the fl ames should never directly touch the inside of the metal insert.
• Avoid physical contact with the bio ethanol.
• It is prohibited for children, people under the infl uence of alcohol, drugs or medications, or
people who are physically or mentally not in good condition, to use the Ceramic Burner.
• Keep children and pets at a safe distance.
• Be careful with infl ammable clothes or hair.
problem
Existence of soot
Existence of soot
Duration of fi re too short
Duration of fi re too short
Flames too high
Flames too low, not visible
Burner makes a rustling noise
Flames are blue, not visible
Flames remain after the
latch has been closed
possible cause
Wrong fuel
Fire-opening is covered with
decoration material
Wrong fuel (e.g. gel)
Burner has not been fi lled
completely
Wrong fuel or draft
Burner has not been fi lled
completely
Wrong fuel (e.g. gel) or
overfi lled
Fuel is almost fi nished
solution
Use ONLY Ruby Fires CL100
Make sure the fi re-opening is
free of decoration material
Use ONLY Ruby Fires CL100
Extinguish the burner. Let it cool
down for at least
30 minutes and then re-fi ll.
Use ONLY Ruby Fires CL100
Prevent draft!
Extinguish the burner. Let it cool
down for at least
30 minutes and then re-fi ll.
Use ONLY Ruby Fires CL100
Extinguish the burner. Let it cool
down for at least
30 minutes and then re-fi ll.
Open the latch and quickly
close it again to refrain
the oxygen supply
problem
possible cause
solution
Existence of soot
Fire-opening is covered with
decoration material
Make sure the fi re-opening is
free of decoration material
Duration of fi re too short
Burner has not been fi lled
completely
Extinguish the burner. Let it cool
down for at least
30 minutes and then re-fi ll.
Flames too low, not visible
Burner has not been fi lled
completely
Extinguish the burner. Let it cool
down for at least
30 minutes and then re-fi ll.
Flames are blue, not visible
Fuel is almost fi nished
Extinguish the burner. Let it cool
down for at least
30 minutes and then re-fi ll.
