Rubine RBO-IA8X-70SS, User Manual

Page: 13 / 23

time (hour, minute) and the square symbol above the
“ ”
begins to flash. In addition, the time countdown begins to work. When it
reaches the set time, the square symbol above the
“ ”
flashes, and the alarm will ring, the square symbol will flash, To stop the
ringing press any button.
Notice: press the relevant button, the setting must be carried out in 5 seconds; if electricity failure suddenly, all the set procedure and the
proper clock time (hour, minute) will disappear.
After electrical power is on again,
“
12:00
”
and the square symbol above
“ ”
will show on the display, you need to set it again .
The oven light
Set knob
“
B
”
to the symbol to turn it on .It lights the oven and stays on when any of the electrical heating elements in the oven come
on.
Cooling ventilation
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan, which comes on automatically when the oven
is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the control panel.
Note: When cooking is done, the fan stays on until the oven cools down sufficiently.
How to Keep Your Oven in Shape
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
·
the enameled or stainless steel parts should be washed with lukewarm water without using any abrasive powders or corrosive
substances which could ruin them ;Stainless steel could get stained .If these stains are difficult to remove, use special products
available on the market. After cleaning, it is advisable to rinse thoroughly and dry.
·
the inside of the oven should preferably be cleaned immediately after use ,when it is still warm ,with hot water and soap ;The soap
should be rinsed away and the interior dried thoroughly. Avoid using abrasive detergents (for example cleaning powders, etc) and
abrasive sponges for dishes or acids (such as lime scale –remover, etc
…
) as these could damage the enamel .If the grease
spots and dirt are particularly tough to remove, use a special product for oven cleaning, following the instructions provided on the
packet. Never use a steam cleaner for cleaning inside of oven.
·
if you use your oven for an extended period of time ,condensation may form .Dry it using a soft cloth.
·
there is a rubber seal surrounding the oven opening which guarantees its perfect functioning .Check the condition of this seal on a
regular basis .If necessary, clean it and avoid using abrasive products or objects to do so. Should it become damaged, please
contacts you’re nearest After-sales Service Center .We recommend you avoid using the oven until it has been repaired.
·
never line the oven bottom with aluminum foil ,as the consequent accumulation of heat could compromise the cooking and even
damage the enamel .
·
clean the glass door using non-abrasive products or sponges and dry it with a soft cloth .
How to Remove the Oven door
For a more thorough clean, you can remove the oven door. Proceed as follows:
·
Open the door to the full extent (Fig.1);
·
Open the lever A completely on the left and right hinge (Fig.2);
·
Hold the door as shown (Fig.3);