Safety Instructions
EN-6
Manual | TM3-Primus
ATTENTION!
Always follow the safety precautions below to avoid the possibility of
physical injury to you or others, or damage to the unit or other property.
These precautions include, but are not limited to, the following:
• Do not block any ventilation openings. Install in accordance with the
manufacturer‘s instructions to prevent the internal temperature from
becoming too high.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifi ers) that produce heat.
• Also keep away the unit from direct incident solar radiation.
• Keep product surfaces clean and dry. Clean only with dry cloth.
• Never use any solvent based liquids for cleaning the housing surfaces
and the display.
• Do not place the unit in an unstable position where it might accidently
fall over.
• Before connecting any devices to the unit make sure that the power
supply is disconnected.
• Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
• Before moving the unit, remove all connected cables.
• When transporting or moving the unit, always take care not to scratch
or damage the housing surfaces and the display.
• Refer all servicing to qualifi ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
