EN-5
Manual | TM3 Series
Safety Instructions
EN
• Only use the power cord and power supply specifi ed for this product
and certifi ed for the country of use.
• Use with power supply model ATS 065T-P/A240, manufactured by
Adapter Technology Co Ltd. (RTW 1178-R).
• The power cord of the external power supply disconnects the product
from the power source. Do not block the power cord or power supply;
it must remain accessible to the user at any time.
• Connect and disconnect properly. Use only connectors specifi ed for
this product and fi x them tight before use.
• Observe all terminal ratings and markings on the product. Consult the
operating manual for further ratings information before making con-
nections to this product.
• Do not apply a potential to any terminal that exceeds the maximum
rating of that terminal.
• Avoid exposed circuitry. Do not touch exposed connections and com-
ponents when power is present.
• Turn off and disconnect the power supply immediately it the unit pro-
duces unusual smells, noises or smoke, or if foreign substances (e. g.
liquids) or foreign objects enter the unit.
• Because of the installed battery the unit shall not be exposed to exces-
sive heat such as sunshine, fi re, or similar.
• Caution: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
• Do not cover the unit and do not place any objects or anything contai-
ning liquids on it.
• Do not insert your fi ngers or any other objects into the housing.
• Do not operate without cover plates or panels.
• Do not operate with suspected failures. If you suspect there is damage
to the unit, have it inspected by qualifi ed service personnel.
• Do not use this apparatus near water.
• Do not operate in wet/damp conditions.
• Do not operate in explosive atmosphere.
• Do not operate in dusty environments.