7 | Specifi cations
EN-76
Manual | TM3-3GS
Upper tolerance M, S, I:
acc. to standard; tolerance above the Target Level, adjus-
table from 0 to +10 LU in steps of 0.1 LU
Lower tolerance M, S, I:
acc. to standard; tolerance below the Target Level, adjus-
table from 0 to –12 LU in steps of 0.1 LU
*) Depending on the used loudness standard not all of the listed settings are available.
Loudness Test Time Control
Settings for operating automatic, semi-automatic or manual loudness measurements.
Start:
- Functions:
Autostart after preset load, autostart with gate, autostart
with gate and autoreset, manually via keys or GPI
- Level for gate:
–70,0 LUFS/LKFS; adjustable from –85 to –10 LUFS/
LKFS in steps of 0.5 LUFS/LKFS
Stop:
- Functions:
manually via keys or GPI, autostop with gate, autostop with
gate and time
- Level for gate:
–70,0 LUFS/LKFS; adjustable from –85 to –10 LUFS/
LKFS in steps of 0.5 LUFS/LKFS
- Time for gate:
1 s; adjustable from 1 to 15 s in steps of 1 s
Loudness Range Instrument (LRA)
Display:
Graphical display of the Loudness Range
Mode:
selectable: LRA Bar, MagicLRA, Ma I,
Ma I + Num
Scale range:
selectable: 6 LU, 10 LU, 20 LU, 30 LU
LRA low range:
2 LU; adjustable, 1 LU steps from 1 to 20 LU
Comfort zone:
4 LU; adjustable, 1 LU steps from 1 to 20 LU
LRA high range:
depends on the selected scale range and the spread of
the comfort zone
Colors:
selectable for each range
SPL Meter Mode
Display:
• Bargraphs for each single channel
(can be combined with PPM bargraphs)
• Summation
bargraph
Reference point:
adjustable in the range from 68 dB to 88 dB in steps of 1 dB
Weighting:
Linear, A (Leq(A)), C, CCIR (Leq(M)), k
Integration time:
Fast (125 ms), Slow (1 s)
Specifi cations (continued)