BTR-30N, TR-30N, TR-32N
Operation 37
2-Wire Intercom
The screens below show the progression of setting 2-wire
parameters.
FIGURE 49.
2-Wire Intercoms
To
adjust the 2-wire intercom settings
, do the following:
1.
From the status screen, press the
MENU
button.
2.
Using the UP/DOWN arrow buttons, select
Intercom
Settings
.
3.
Press
SET
.
4.
Using the UP /DOWN arrow buttons, select
2-W
.
5.
Press
SET
.
The 2-wire intercom type flashes.
6.
Using the UP/DOWN arrow buttons, set the
intercom type
.
7.
When finished, press
SET
.
The intercom channel flashes.
NOTE:
If off is selected, the 2-W/4-W menu options
appear.
8.
Using the UP/DOWN arrow buttons, select the
intercom
setup
–intercom 1, intercom 2, or both.
9.
Press
SET
.
The intercom input level flashes.
10.
Using the UP/DOWN arrow buttons, select the
input level
.
11.
When finished, press
SET
.
12.
Proceed through the
intercom settings
.
Once finished, the screen display returns to the 2-W/4-W
selection menu.
13.
Press
MENU
twice to go back to the status screen.
NOTE:
The base defaults back to the status screen if no
action is taken after five (5) minutes.
4-Wire Intercom
The screens below show the progression of setting 4-wire
parameters.
FIGURE 50.
4-Wire Intercoms
To
adjust the 4-wire intercom settings
, do the following:
1.
From the status screen, press the
MENU
button.
2.
Using the UP/DOWN arrow buttons, select
Intercom
Settings
.
3.
Press
SET
.
4.
Using the UP /DOWN arrow buttons, select
4-W
.
5.
Press
SET
.
The intercom one 4-wire on/off selection flashes.
6.
Using the UP/DOWN arrow buttons, select
on or off
.
7.
When finished, press
SET
.
The intercom input level flashes.
NOTE:
If off is selected, the screen skips to the intercom
two screen.
8.
Using the UP/DOWN arrow buttons, select the
intercom
setup
–intercom 1, intercom 2, or both.
9.
Press
SET
.
The intercom input level flashes.
10.
Using the UP/DOWN arrow buttons, select the
input level
.
11.
When finished, press
SET
.
12.
Proceed through the
intercom output settings
in a similar
manner.
Once finished, the intercom two 4-wire on/off selection
flashes.
13.
Repeat
steps 6-12
for intercom two.
Once finished, the screen display returns to the 2-W/4-W
selection menu.
14.
Press
MENU
twice
to return to the status screen.
NOTE:
The base defaults back to the status screen if no
action is taken after five (5) minutes.
