BTR-30N, TR-30N, TR-32N
Operation 57
Groups and Channels
The first LCD screen the beltpack displays is the Group/
Channel screen. This screen shows the currently selected
receive group followed by the beltpack transmit channels.
To
edit groups and channels
, do the following:
1.
Push
SET
to edit the transmit channel.
The channel number flashes.
2.
Using the UP/DOWN arrow buttons, select
the desired
transmit channel
.
3.
Push
SET
to accept the channel.
The receive group flashes.
4.
Using the UP/DOWN arrow buttons, select
the desired
receive group
.
5.
Push
SET
to accept the receive group.
The new group containing the selected channel is now set.
NOTE:
•
To escape out of the editing without any changes,
Press MENU.
•
Factory group frequencies cannot be changed.
User group frequencies (Group 19u to 30u) can be
changed.
Transmit Frequency
The
Transmit Frequency
screen displays the beltpack
transmitter frequency in MHz. The frequency is not changeable
in factory-determined groups, but it is changeable in user-
defined groups.
To
edit the TX frequency (User Groups Only)
, do the
following:
1.
Set
the unit
to the desired user-defined group and channels.
See Groups and Channels Instructions. The menu structure
in Figure 73 indicates how to get to the transmit frequency
screen.
2.
Push
SET
to edit the TX frequency.
The frequency flashes.
3.
Using the UP/DOWN arrow buttons, select the
desired
frequency
.
The frequency can be changed in 25 kHz steps.
4.
Push
SET
to place the unit on the new transmit frequency.
FIGURE 73.
Group/Channel & Transmit
Frequency Screen
