WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious
personal injury.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY
1.
Before using battery cartridge, read all instructions and cautionary markings on battery charger,
battery, and product using battery.
2.
Do not disassemble battery charger.
3.
If operating time has become excessively shorter, stop operating immediately. It may result in a
risk of overheating, possible burns and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention
right away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
(1)
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
(3)
Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
6.
Do not store the tool and battery cartridge in locations where the temperature may reach or
exceed 50
ﾟ
C (122
ﾟ
F).
7.
Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
8.
Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
The battery charger
Use only the chargers listed in the technical data.
Only these chargers are matched to the lithium-ion
battery of your power tool.
Note:
The battery supplied is partially charged. To ensure full capacity of the battery, completely
charge the battery in the battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its service life. Interrupting
the charging procedure does not damage the battery.
The lithium-ion battery is protected against deep discharging by the “Electronic Cell Protection
(ECP)”. When the battery is empty, the machine is switched off by means of a protective circuit:
The inserted tool no longer operation.
Do not continue to press the On/Off switch after the machine has been automatically
switched off.
The battery
can be damaged.
Safety instructions for battery chargers
Before charging, read the instructions.
