Installing or removing battery cartridge
Always switch off the tool before insertion or removal of the battery cartridge.
To install
the battery pack into the tool handle, align the
base of the tool with the notch inside the tool’s handle and
slide the battery pack firmly into the handle until you hear
the lock snap into place as shown in the picture;
To remove
the battery pack from the tool, press the
release buttons and firmly pull the battery pack out of the
tool handle.
Charging
1.
Insert the battery pack into the charge base.
2.
The green light flash indicating charging is in process.
3.
Once the green light stop flashing charging is finished.
4.
press the detach button and pull the battery out of the
base.
Abnormal charge
1.
If the red light keep flashing, there is something wrong
with the charger or battery.
Stop charging and take your charger and battery pack to the authorized customer
service center when an abnormal charge occur.
Assembly
Warning! Before assembly, make sure that the tool is switched off.
Blowing
For dust blowing, attach nozzle to blower outlet, turning clockwise to lock it in place
