RTI RTiDock, Installation And Operation Manual

Page: 40 / 52

RTiDock
40
• Upon selecting the Configuration tab a prompt will appear asking for your
username and password. The RTiDock is shipped with a default username
of “root” and no password set. Enter “root” into the User name field, leave the
Password field blank, and select the [OK] button.
• After selecting the [OK] button the Configuration tab will open. From this screen
you will be able to change the following configuration settings: IP Address, Subnet
Mask, Default Gateway, LAN Interface, Video Mode (NTSC or PAL), Artwork
Download (Enable or Disable), Screen Saver Start Time, Power Control (Enable or
Disable), and/or LED Control Mode (Reflect power status or Always off). Please
refer back to Chapter 4 for descriptions of these settings.