RTI RTiDock, Installation And Operation Manual

Page: 21 / 52

21
It’s Under Control
®
RTIDOCK
ARTWORK TEMPLATE
SEPTEMBER 15, 2010
POWER RESET ETHERNET RS-232 IR INPUT COMPONENT VIDEO AUDIO USB
Y PB PR S/PDIF LEFT RIGHT
VIDEO OUTPUT
RTiDock
The RTiDock has a component output for displaying a video interface on a television
or video monitor. The video interface allows browsing of music, viewing “now
playing” information including album art and adjusting the settings of the RTiDock.
• Using component video cables (RG59, RG6) with RCA plugs, connect to the video
outputs (Y/PB/PR) on the rear of the RTiDock. Connect the opposite end of the cable
to your television or video distribution system.
Television
CHAPTER 3 | CABLES AND CONTROL
CHANGING THE RTiDOCK TO OUTPUT PAL VIDEO SIGNAL
Pressing and holding the menu key for 5 seconds will cause the RTiDock to toggle
between NTSC and PAL video signals. The default value is NTSC (United States).
If your video equipment requires PAL output signal, then this operation will be
required before the video output of the RTiDock will be visible. The iPod must be
removed from the RTiDock prior to pressing and holding the menu key. This prevents
accidental toggling of the NTSC/PAL setting.