
90
Initiating Virtual Devices from Setup
If the cpuModule is operational, Virtual Device mode can be accessed from Setup. This method has
the advantage that you can individually select devices for use in Virtual Devices mode. To use this
method, run Setup on the cpuModule and select the Virtual Devices you wish to use. The settings
for floppy drive A:, keyboard, and video state, and hard disk C: can each be set to "serial". Save your
changes and then follow the procedure below:
1)
Turn off power to the cpuModule system.
2)
Connect the null modem cable between the cpuModule and host computer.
3)
Turn on the host computer.
4)
Start the SERRX.EXE program on the host computer, specifying which serial
port of the host computer you wish to use.
5)
Turn on the cpuModule system.
The cpuModule system will now boot from the disk drive you configured in Setup. If you have a C:
disk on the PC/104 system, it will be drive D:.
Summary of Contents for CMV6486DX100HR
