rtd CMV6486DX100HR, User Manual

Page: 54 / 118

54
Field Selection
You move between fields in Setup using the keys listed below.
Standard Setup Fields
The following is an alphabetical list of Standard Setup fields.
Setup Keys
Key Function
Ð
selects next field
Ï
selects previous field
{TAB} selects next field on the right or first field of next line
Î
selects next value in field
Í
selects former value in field
{ESC} returns to main menu
Standard Setup Fields
Field Active keys Selections
Boot Device
Í Î
Selects the primary boot device.
Possible selections:
•
Floppy Disk
• SSD (Solid State Disk)
• Hard Disk
• This selects the device from which system
boot is first attempted.
• Hard Disk is used to boot from Hard Disk or
a BIOS Extension device in an SSD socket.
Date {0..9},{
↵
} Sets the date with the format:
•
month / day / year
• You must connect a backup battery, or this
setting will be lost at power down.
Hard disk 1 type
Hard disk 1 table
{0..9} {
↵
} Selects the first hard disk type.
Selections are:
•
Not Installed
• Standard : (drives under 1024 Cylinders)
• Serial: for Virtual Devices mode.
• When using Standard, manually enter param-
eters under Hard Disk 1 Table. LBA param-
eters will be calculated automatically.