rtd CMV6486DX100HR, User Manual

Page: 79 / 118

79
Processor Clock Control
The processor clock can be programmed in the setup program. Further, the processor clock may be
changed by a solder jumper on the back of the board. For 586DX133 boards, the switch is between
clock-quadrupled and clock-tripled operation. For 486DX100 boards, the switch is between clock-
tripled and clock-doubled operation. Please contact the factory for further information on imple-
menting this change.
Please see Power Consumption on page 11 for a listing of Power Consumptions at different clock
speeds.