Rt IDLV-4000P-30x, User Manual

Page: 18 / 38

14
IPTV mode
Max Channels (<=32): You can configure the number of IPTV channel. The valid
range goes from 0 to 32.
After the configuration, you can use <↑> <↓>-keys to roll up and down between
the channels. Each channel could be configured independently.
Channel x:
‘x’ means the channel number. Press the <ENTER>-key to go down
to the sub-menu. There are 4 sub-menus:
x-Multicast IP:
Enter the IP address of the IP stream for the transport stream
over IP output.
You can also configure the IP stream output mode in Multicast or Unicast by set -
ting Multicast IP address.
x-Multicast Port: Enter the UDP port number of the TS over IP stream output.
x-Switch: Each channel could be switched On/Off independently. The default
value is ‘off’. To activate the channel, you need to set the switch to be ‘on’.
x-Program: It shows all programs carried by the transport stream from the
source selected. Press the <ENTER>-key and use <↑> <↓>-keys to roll up and
down between the program names, where the character in front of the program
name indicates the input source (the meaning is the same as Mux function).
All encrypted programs are labeled with a ‘$’ sign on the first row. Press the
<ENTER>-key to selected the program you wish to be delivered to the specified
IPTV channel. Press the <EXIT>-key to exit the settings.
SySTeM
The system menu provides information about the general functions, the surroundings equipment and the
hardware being used.
SYSTem
properTIeS mAchIne TYpe
o p T I o n A l
funcTIon
fAcTorY
SeTTIngS
TrAp Ip locAl SeTup unIT nAme