18
SETUP
Audio Setup
SPDIF OUT
AUDIO OUTPUT SETTING
OFF
: Analog audio output through the jacks on back panel (FL, FR, RL, RR, Center, Sub-
Woofer). If Karaoke is precedence, you must select analog audio.
SPDIF/RAW
: Through the Coaxial/Optical jack to output Dolby 5.1CH digital or DTS digital
audio.
SPDIF/PCM
: Through the Coaxial/Optical jack to output PCM digital audio.
OP MODE
LINE OUT
: Line out mode, with digital dialog normalization.
DEFAULT
RF REMOD
: RF re-modulation mode, with heavy compression and digital dialog
normalization.
DUAL MONO
This is SIMILAR TO Multiplex television and can work only for the Disc designed for DUAL
MONO program.
STEREO:
Output proper channels through both right and left speakers.
R-MONO
: Output the channel of the right side through both right and left speakers.
L-MONO:
Output the channel of the left side through both right and left speakers.
MIX-MONO:
Outputs through both right and left speakers by mixing up two channels.
COMPRESSION SOUND OUPUT REINFORCEMENT
This is a function to adjust the sound dynamic range.
PRO LOGIC
There are three modes of OFF/ON/Auto.
LPCM OUPUT
If you connect the DISC Player to a PCM compatible receiver via the digital terminals, such as
coaxial or optical etc, you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling rate. The higher sampling rate, the better sound quality.
LPCM 48K
: Playback a disc recorded at the sampling rate of 48kHz.
LPCM 96K:
Playback a disc recorded at the sampling rate of 96kHz.
Video Setup
TV DISPLAY
NORMAL PS( 4:3 PAN SCAN)
: If you have a normal TV and want both sides of the picture
to be trimmed or formatted to fit your TV screen, press ENTER.
NORMAL LB(4:3 LETTER BOX)
: If you have a normal TV, In this case, a wide picture
with black bands on the upper and lower portions of the TV Screen will be displayed.
WIDE HDTV(16:9)
: If you have a wide-screen TV.
TV TYPE
PAL:
Select this if the connected TV is PAL system. It will change the video signal of a
NTSC
disc and output in PAL format.
NTSC:
Select this if the connected TV is NTSC system. It will change the video signal of a
PAL
disc (VCD only) and output in NTSC format.
AUTO:
Select this if the connected TV is compatible with both NTSC and PAL (multi-
system). The output format will be in accordance with the video signal of the disc.
RESOLUTION
480i
: Select this to get normal Video quality of 480i (Interlaced) via Composite Cable.
480P
: Select this to get the Progressive Scan Video Quality of 480P via Component Cable
(Y,Pb,Pr) or HDMI.
720P
: Select this to connect with HDTV and to get the HD Video Quality of 720P via
Component Cable (Y,Pb,Pr) or HDMI.
[NOTE]
720p does not output simultaneously with composite video so you must select 720p after
connecting component cables (Y,Pb,Pr) or HDMI to the TV/Monitor in advance.
