RS 754-1933, Original Instructions Manual

Page: 5 / 98

3
Original instructions EN
II - Technical specifications
model 754-1933
▪ Motor V 18
▪ No load speed (1st gear/2nd gear) min
-1
0-400/0-1900
▪ No load impact rate min
-1
0-34200
▪ Max. torque Nm 68
▪ Torque control settings 25+1
▪ Keyless chuck capacity mm 1.5-13
▪ Drilling capacity in steel / wood / concrete mm 13/36/13
▪ Wood screw max. diameter M13
▪ Electronic trigger speed control, left - right run Yes
▪ Electric brake Yes
▪ Auto spindle lock Yes
▪ LED work area light Yes
▪ LED charge indicator Yes
▪ Two-speed gear Yes
▪ Weight (EPTA procedure 01/2003) kg 2.0
NOIse AND vIbRAtION INfORmAtION (Measured values determined according to EN 60745.)
▪
Noise emission
A-weighted sound pressure level L
pA
dB(A) 91
Uncertainty К
pA
dB 3
A-weighted sound power level LwA dB(A) 102
Uncertainty К
wA
dB 3
Wear hearing protection!
▪ vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Vibration emission vallue in impact mode a
h,ID
m/s
2
13
Uncertainty К
h,ID
m/s
2
1.5
Vibration emission vallue a
h,D
m/s
2
< 2
Uncertainty К
h,D
m/s
2
1.5
* The vibration emission values are determined according to 6.2.7 EN 60745-1
bAtteRy (li-Ion):
▪ Voltage V 18
▪ Capacity Ah 2.6
▪ Weight kg 0.6
CHARGeR
▪ Input:
Voltage / frequency V~Hz 220–240~50
Consumption VA 70
▪ Output voltage / current V/A 18 / 2.6
▪ Charging time min 60
▪ Weight kg 0.6
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dif-
ferent applications, with different accessories or poorly maintained, the vibration emission may differ. This may signifi -
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the harmful effect
of vibrations.