Temperature Calibrator (RTD + TC)
/ EN
_________________________________________________________________________________
3 03/27/2020 Version No. 1
detection (TCD) for the TC MEASURE mode. In the SETUP, press SHIFT
button to clear the field for the new data entry.
6. Thermocouple (TC) input and output.
7. Sliding switch for selecting RTD connection 4W, 3W, 2W or thermocouple.
8. Auto step and auto ramp function for source. Press Shift first to select.
9. Offset function to recalibrate calibrator’s offset value.
10. 25%
▲
(5):
In the SOURCE mode, press SHIFT then 25%
▲
, calibrator increases output
by 25% of predefined span of 0% to 100%
In the SETUP, press
▲
to select previous item
25%
▼
(0):
In the SOURCE mode, press SHIFT then 25%
▼
, calibrator decreases output
by 25% of predefined span of 0% to 100%.
In the SETUP, press
▼
to select next item
0 %◄ (7):
In the SOURCE mode, press SHIFT then 0%, calibrator outputs predefined
0%.
In the SETUP, press ◄ to select the previous option of the item (e.g. RTD or
TC type).
100 %► (9):
In the SOURCE mode press SHIFT then 100%, calibrator outputs predefined
100%.
In the SETUP, press ► to select the next option of the item (e.g. RTD or TC
type).
