RPM MPQ Series, User Manual, Page: 30 / 48

RPM Systems Corporation
March, 2016 Page 30
MPQ Manufacturing Programmer User's Guide
optional Target Cable assembly which provides bare leads on the target ends of the cable assembly, allowing
the customer to produce custom interconnects which are compatible with a given manufacturing or development
setup. The following table shows the pin assignments for the various connectors. One Target Cable assembly
provides four sets of target programming signals.
MPQ
Target
Connector
Pin #
Signal
Name
Signal Description Wire Color
Molex
Pin #
1 - Not Used
2 Vcc Target Vcc Red 1
3 SCLK Programming Clock Blue 4
4 SDATA Programming Data White 5
5 XRES Target Device Reset Yellow 3
6 -
Not Used
-
7 -
Not Used
-
8 GND Target GND Black 2
9 Vcc Target Vcc Red 1
10 SCLK Programming Clock Blue 4
11 SDATA Programming Data White 5
12 XRES Target Device Reset Yellow 3
13 -
Not Used
-
14 -
Not Used
-
15 GND
Target GND
Black 2
16 Vcc Target Vcc Red 1
17 SCLK Programming Clock Blue 4
18 SDATA Programming Data White 5
19 XRES Target Device Reset Yellow 3
20 -
Not Used
-
21 -
Not Used
-
22 GND Target GND Black 2
23 Vcc Target Vcc Red 1
24 SCLK Programming Clock Blue 4
25 SDATA Programming Data White 5
26 XRES Target Device Reset Yellow 3
27 -
Not Used
-
28 -
Not Used
29 GND Target GND Black 2
30 - Not Used
Ta
rg
e
t P
o
rt
4
MPQ-PSoC Target Cable Connections
T
a
rg
et
Po
rt
1
Ta
rg
e
t P
o
rt
2
T
a
rg
et
Po
rt
3
NOTE: The GND signal must be common amongst the four target ports when connected to the
programmer. All GNDs are tied together internal to MPQ.