RPB Vision-Link, Instruction Manual, Page: 9 / 24

9
CHANGE THE COWLING SEAL
Overtime, the cowling seal may need to be
replaced to keep a tight seal. To remove the
old seal, open the latch and pull out the old
seal. Insert the new seal into the groove,
matching up the corners and edges so that
it is in the correct position. Close the unit
and latch.
FIGURE 5.1
FIGURE 5.2
BATTERY
To reduce the risk of battery fire or explosion or of fire or electric shock
with the charger, follow these precautions and procedures:
Before charging

Allow the battery to cool before charging if it feels hot.
 Inspect the battery before each time it is charged. If there are any cracks or damage do not
charge the battery.
 Inspect the charger and power cords before use. Replace if any parts are damaged. Do not
substitute, modify or add parts to the chargers. Do not attempt to service the chargers. There
are no user-serviceable parts inside.

Use only the provided charger and cord.
Where to charge
Charge only:
 indoors,

in a dry area,
 away from sources of heat,

away from anything that can burn if exposed to heat or flame,
 in a well-ventilated place,

where the charger can be monitored and easily observed during charging.
WARNING