fReSCaPURe
™
7
3
Depress the Red “Inlet” Collar on Lid while
pulling Fitting upward to remove. Repeat
this procedure to remove fitting from Blue
“Outlet” Collar.
4
Grasp Clamp and lift upward to remove Filter
Housing from Enclosure. Set Filter Housing
on towel in base of sink.
5
Turn Knob counterclockwise to loosen Clamp.
Push Knob forward to unlatch T-Bolt from
Clamp.
Once Clamp is removed, lift Lid upward.
This step will expose the Filter Cartridge.
6
While holding Lid, turn Cartridge counter-
clockwise to remove.
Wrap in newspaper
and discard with normal refuse.
7
Wash the inside of the Housing and Lid with
warm water and a mild dishwashing detergent.
Rinse well and dry with a clean cloth.
8
Remove the sanitary plastic wrap from the
new Filter Cartridge. Thread the new
Cartridge clockwise onto Lid until you feel
resistance. Make an additional quarter turn.
dO NOT over-tighten
9
Make certain Gasket is firmly seated onto Lid.
With new Cartridge connected to Lid, lower
Cartridge into Housing and align with Housing.
10
Place Clamp around Lid and Housing. Push
Knob forward to latch T-Bolt. Tighten Knob.
RecOMMeNdATION
Rubber gloves should be worn
to avoid direct contact with contaminants removed by
this System.
ONly ReMOVe bATTeRy shuTTle
AT TIMe Of cARTRIdGe RePlAceMeNT
Removing
Battery Shuttle prematurely may result in a loss of
stored data.
a new Battery Shuttle is included with
every Genuine, WQa Certified, Royal Prestige
filter Cartridge.
IMPORTANT
cAuTION
Do not use abrasive pads or abrasive
cleaners (including cleaners containing bleach) as this
will result in scratching and damage to your System.
NOTe
to release tubing fittings from Collars, a Collar
Release tool has been provided for your convenience.
4
6
10
5a
5b
3
Collar Release tool
9a
9b
Gasket
Summary of Contents for FP6000CT
Page 19: ...FRESCAPURE 17 Notes...
