10
fReSCaPURe
™
TyPiCal UndeR-CoUnTeR sysTem insTallaTion
dRillinG a hole in a sTainless sTeel sink:
1
Locate an area on your sink to install the
Dedicated Drinking Water Faucet.
(Make
certain there are no support ribs under the sink
in that area.)
Cover the designated location
for the faucet installation on sink with masking
tape. Use the punch and hammer to make
a light indentation at the designated faucet
installation location.
2
Using a 1/8” high speed drill bit, drill a pilot
hole in the sink.
3
Use a 1” hole saw to enlarge the pilot hole
to final size.
this type of sink can be scratched very easily. Use extreme care.
If you have any doubts about doing this yourself, consult a licensed plumber
cAuTION
2
3
1
Dedicated
Drinking Water
Faucet
Monitor
Filter
Housing
RED
Tubing
WHITE
Tubing
T-Valve
BLUE
Tubing
Cable
Hot
Cold
Summary of Contents for FP6000CT
Page 19: ...FRESCAPURE 17 Notes...
