background image

  fReSCaPURe

  

1

inTRodUCTion 

congratulations on the purchase of your new frescaPure

 drinking Water 

system! 

You have taken an important step toward improving the quality of 

your drinking and cooking water. 
This System will serve you reliably for many years to come when operated  
and maintained according to the instructions in this manual. You have made 
a wise investment. Now, please take a few additional minutes to complete 
reading this manual, so that you may realize all the benefits your new  
FrescaPure

 Drinking Water System has to offer! 

imPoRTanT Use GUidelines

  Read this manual completely before attempting to install or use this product.

  Actual capacity of your System may vary from the rated capacity. This may 

be due to the volume of contaminants actually present in your water supply. 
To insure best results, replace Filter Cartridge when the first of the  
following occurs:

  

– Annually

  

– When the Display begins flashing RED

 (indicating the rated capacity  

 

    has been reached)

 

  

– When the flow rate diminishes

  

– When you notice a taste or odor recurrence

  Do not use with water that is microbiologically unsafe or of unknown 

quality without adequate disinfection before or after the System. 

  Systems certified for cyst reduction may be used with disinfected water 

that may contain filterable cysts.

  Individuals requiring specific microbiological purity should consult their 

physician.

  This System is not intended to convert waste water or raw sewage into 

drinking water.

  DO NOT mistake Red Collars and Tubes as a “hot” water feed line. This 

system is for use on cold potable water supplies only. 

Color coding is only 

to insure proper connections to the System “Inlet” and “Outlet” ports.

  For this System to continue to perform as tested and represented, use only 

Genuine, WQA Certified, Royal Prestige Filter Cartridges.

  Genuine, Royal Prestige Filter Cartridges may be purchased from your 

Independent Royal Prestige Representative. For additional purchase  
information, please contact the Royal Prestige Customer Service Center 
at: 

1-800-279-3373

.

Summary of Contents for FP6000CT























Reviews: