fReSCaPURe
™
15
RePlaCinG The filTeR CaRTRidGe: UndeR-CoUnTeR sysTem
The most important part of maintaining your new FrescaPure
™
Drinking
Water System is replacing the Cartridge on a regular interval. To insure best
results, the Cartridge should be replaced upon the first occurrence of the
following conditions:
– Annually
– When the Monitored Beauty Ring begins flashing RED
(indicating the rated capacity has been reached)
– When the flow rate diminishes
– When you notice a taste or odor recurrence
1
Turn “OFF” the cold water supply. Using
the Tool provided, depress Red Collar on
Lid, while pulling upward on the Red Tubing
at the same time. Repeat this procedure to
remove the Blue Tubing from Lid.
2
Place System in sink. Turn Knob counter-
clockwise to loosen Clamp. Press Knob
forward to unlatch T-Bolt from Clamp. Once
Clamp is removed, lift Lid upward. This step
will expose the Filter Cartridge.
3
While holding Lid, turn Cartridge counter-
clockwise to remove. Wrap in newspaper and
discard with normal refuse.
4
Wash inside of Housing and Lid with warm
water and a mild dishwashing detergent.
Rinse well and dry with a clean cloth.
Rubber gloves should be worn
to avoid contact with contaminants removed by System.
RecOMMeNdATION
cAuTION
Do not use abrasive pads or abrasive
cleaners (including cleaners containing bleach) as this
will result in scratching and damage to your System.
Insist on Genuine, WQa Certified, Royal Prestige filter Cartridges.
only Genuine, Royal Prestige Cartridges have been tested and certified by the Water
Quality association to insure the performance represented in the Performance Data
Sheet.
failure to use Royal Prestige filter cartridges and replacement components
will invalidate your warranty
IMPORTANT
3
2a
2b
NOTe
to release tubing fittings from Collars, a Collar
Release tool has been provided for your convenience.
1
Collar Release tool
Summary of Contents for FP6000CT
Page 19: ...FRESCAPURE 17 Notes...
