background image

Royal Enfield Hunter 350

12

RULES OF THE ROAD

„

  All traffic signs, including manual controls at 

intersections, should be obeyed promptly. Slow 
down at traffic signs near schools and caution signs 
at rail road crossings.

„

  Do not leave the curb or parking area without 

signaling. Be sure your way is clear to enter moving 
traffic. A moving line of traffic always has the right-
of-way.

„

 

When parking the motorcycle, park on a firm and 
flat surface to prevent it from falling over.

„

  Protect your motorcycle against theft. After 

parking your motorcycle, ensure that the steering 
head is locked and then remove the ignition key.

„

 

When intending to turn, signal 
at least 100 feet (30.5 m) before 
reaching the turning. Be close to 
the center line (unless local rules 
require otherwise), slow down 
and then turn carefully.

„

 

Never jump a traffic light. When 
a change is imminent from 
go to stop (or vice versa) at 
intersections, slow down and wait 
for the light to change to green. 
Never run through a yellow or red traffic light.

Yellow

Green

Yellow

Red

Summary of Contents for Hunter 350













































































































Reviews: