Royal Enfield Hunter 350 Owner'S Manual Download

Page: 58 / 108

Royal Enfield Hunter 350

STARTING

Accelerate only after the idling rpm has stabilised
and it is consistent.

Ensure side is in fully retracted position. Failure to
do so will cause the engine to switch “OFF” as soon
as gear is engaged.

WARNING

Please exercise extreme care while riding the
motorcycle. Failure to do so can result in an accident
causing injury to you or to other road users / passerby.

Ensure gear in neutral position and the neutral

lamp is glowing in the speedometer. To shift into
neutral, move the motorcycle back and forth

gently, while simultaneously shifting the gear.

CAUTION

Do not attempt to shift gears without moving the
motorcycle back and forth as it will damage the gears
mechanism.

Depress and hold the
clutch Lever.

Press starter button
and hold till engine
starts. Do not release
the button before
engine starts.

Do not press the starter button more than
5 s after three successive cranking, wait for
15 to 20 s the battery to recover.

Summary of Contents for Hunter 350













































































































Search results

Summary of Contents for Hunter 350

Reviews:

Related manuals for Hunter 350

Brands by name

Popular brands

Royal Enfield Hunter 350, Owner'S Manual

Search results

Summary of Contents for Hunter 350

Reviews:

Related manuals for Hunter 350

Brands by name

Popular brands