Royal Enfield Bullet 350 2019, Owner'S Manual

Page: 46 / 68

44
MINOR MAINTENANCE TIPS
TAIL LAMP BULB

Remove the two nuts each from
Right & Left side of the rear
number plate holder.

Pull out Tail Lamp assembly
along with bracket and
twist the bulb holder in
anticlockwise to remove bulb
holder assembly.

Turn old bulb to remove and
replace with a new bulb.

Refit the bulb holder and turn
clockwise to lock the bulb
holder.

Refit the tail lamp with bracket
on the reverse order of
removal process.
TRAFFICATOR BULB

Remove the screws & take out
trafficator glass cover.

Press bulb gently & Turn anti-
clockwise to take out the bulb.

Position the new bulb inside
holder, ensuring that the pins
in the bulb, match with the slots
in the holder.

Gently press the bulb and turn clockwise to lock
the bulb in the holder.

Refit the trafficator glass and screws, ensuring the
lens slot / cut mark is at the bottom.
NOTE
Make sure the Ignition switch is in “OFF” position when
replacing the bulbs and Electrical parts.